Fairview Microwave has expanded its line of 40 GHz fixed RF attenuators with 2.92 mm connectors offering attenuation levels of 0 to 10, 12, 15, 20, and 30 dB. Fairview’s 40 GHz attenuator pads are designed to lower the amplitudes of RF signals in a large variety of applications, including R&D, lab use, wireless networks,…
40 GHz attenuators now have 2.92 mm connectors
Pasternack has expanded its line of 40 GHz fixed RF attenuators with 2.92 mm connectors that lower the amplitudes of signals in a wide variety of applications. Pasternack’s 40 GHz attenuator pads are engineered for preventing signal overload in amplifiers, detectors, and receivers and adjusting RF signal levels to an optimal range. These 40 GHz fixed…
Technical demonstrations round out two 6G conferences
Most demonstrations centered on sub-terahertz communications and the technologies needed to make them a reality.
Voltage-variable attenuators operate across six frequency bands
Pasternack now provides six new models of waveguide packaged, voltage variable attenuators covering popular mm-wave frequency bands ranging from 26.5 GHz to 110 GHz. Pasternack’s new waveguide packaged, voltage variable attenuators utilize GaAs MMIC semiconductor technology and offer 0 dB to 30 dB attenuation tuning adjustment with a voltage range of 0 Vdc to 5 Vdc. Designers…
Fixed RF attenuator handles 300 W
BroadWave Technologies announced a 300-Watt fixed attenuator series designed for wireless applications. These attenuators reduce the amount of power delivered in a transmission line without introducing much noise or distortion. Model series 352-023-XXX is a 50-Ohm fixed attenuator with an operating frequency range of DC to 2400 MHz. Standard attenuation values are 3, 6, 10,…
Attenuators cover DC to 2 GHz
Model series 351-276-XXX* are a line of 50 Ω fixed attenuators that produce attenuation values between 40 and 80 dB in 1 dB increments. These devices are rated 2-Watts average power with 1.40:1 maximum VSWR. The operating frequency range is DC – 2000 MHz, the operating temperature range is -55°C to +100°C and the RF…
RF attenuator covers 20 dB range
The model 651-038-020 step attenuator covers DC to 2.5 GHz. BroadWave Technologies has introduced the 651-038-020 voltage-controlled programmable attenuator designed for use in scientific instruments. It features an attenuation range of 0 dB to 20 dB in 20 dB steps with ±0.6 dB attenuation accuracy. It’s frequency range is DC-2.5 GHz. Insertion loss is 0.6…
RF attenuator adjusts signals from 200 MHz to 8 GHz
Mini-Circuits RC4DAT-8G-120H RF signal attenuator reduces signals as much as 120 dB controlled over a USB or LAN link.
Overcome 5G mmWave measurement issues
Signal analyzers and best measurement practices can minimize errors that result from losses at mmWave frequencies.
IMS2021: Live event was never in doubt
While the International Microwave Symposium will also hold a virtual conference, exhibitors insisted on a live event albeit with COVID-19 restrictions.